HGA ST PRO 600- Slim profile PEM Hydrogen Generator 600 cc/min

HGA ST PRO 600- Slim profile PEM Hydrogen Generator 600 cc/min

SKU: hga-st-pro-600-1
REQUEST A QUOTE

HGA ST PRO 250- Slim profile PEM Hydrogen Generator 250 cc/min Ultra High Purity with integrated zero air.

REQUEST A QUOTE

Primary Applications:
-Carrier gas for GC and GC-MS
-GC-FID / GC-NPD / GC-FPD
-THA

Hydrogen + Air generators

LNI Swissgas produces combined Hydrogen and Air generators able to generate Hydrogen with a high purity and high pressure with an AirGen output to deliver hydrocarbon free pure Air. Those generators allow to eliminate the inconvenient cumbersome gas cylinders. They are equipped with a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are used.The HydroGen series HGA ST PRO is able to generate up to 600 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 psi). An AirGen output can deliver hydrocarbon free pure Air with a flow up to 2000 cc/min.

The HGA ST PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity and is completely maintenance-free.

The HGA ST PRO is the ideal Hydrogen and Air Generator for all GC-FID detectors. The on-board CPU constantly controls the operating parameters to guarantee full safety. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.

Product Features:
-Quick installation
-Easy use
-Hydrogen flow rate up to 600 cc/min
-ZeroAir flow rate up to 2000 cc/min
-Pressure up to 16 bar (232 psi)
-Hydrogen purity: 99.99999%
-THC: < 0.1 ppm
-RS 485 and USB as standard
-LAN optional
-Dryer with no maintenance
-Reduced foot print
-High pressure GLS electronically controlled (patented)

Technical Specifications-

General data
Electrolytic cell: PEM technology
Drying system: PSA (Pressure Swing Adsorption)
H2 purity: >99.99999% 1
Outlet pressure: 12 bar (174 psi) / 16 bar (232 psi) (optional)
H2 flow-rate cc/min (Max): 600
Dimensions (WxHxD): 9.5 x 44 x 48 cm
Net weight (no water in tank): 22 kg

Communication
RS485/USB: Standard
LAN: Optional

Software functions
Parallel mode: Ready on board
Automatic tank refill: Standard

Water
Quality: Deionized, ASTM II, <0.1uS
Supply pressure (min, Max): 0 bars (0 psi), 0.5 bar (7.25 psi)
Internal tank capacity: 0.3 l

Electrical data
Type of connection: IEC 320-C14
Power supply voltage: 100-240 Vac (±10%) 50/60 Hz
Nominal power (Max): 500W
Fuse rating (5x 20 mm): 4A (250VAC -T)

Connections
Hydrogen outlet: 1/8” compression fitting
Water (inlet, drain): Quick release push-in fitting

ZeroAir section
Inlet pressure (Max): 8 bars (116 psi)
Max THC (Inlet Air): 100ppm
Outlet flow rate (max): 2000 cc/min
Outlet pressure (max): Inlet pressure – 0.5 bars (8 psi) at maximum flow
THC (ZeroAir Outlet): <0.1ppm
Inlet, Outlet ports: 1/8″ BSPP female
1 Referred to O2 – DewPoint < -75°C (< -103°F), Atmospheric Dew point (ADP)

It's Our Responsibility

Small choices. Big impact.

Science moves us forward. So should sustainability. At Go Green Scientific, we offer carefully selected lab supplies designed to reduce waste and protect the planet—without compromising quality or compliance.

Science Meets Sustainability

We know scientists ask tough questions—and we welcome them. That’s why we vet every product for performance, sustainability, and integrity.

You might also like